Roof “B” and “D” Sections Finally Completed
Today, we finally got the eleven rafters up and installed in the Front Extension portion of the building, completing six rafters on the “B” section of the roof and a…
A DIY Selfbuild by Stephen, Shaun & Daphne
Today, we finally got the eleven rafters up and installed in the Front Extension portion of the building, completing six rafters on the “B” section of the roof and a…
On a very, very chilly day (temperature floating around the low single digits!), we were in the workshop slicing the bevelled ends on our eleven rafters we made yesterday. The…
After a delayed start, we got on with the creation of the rafters to complete the “B” and “D” roof sections. But first, we filled up our “compressed air” glue …
First thing this morning, we took outside the four and a half rafters created yesterday and got them installed up into the roof framework over the front door and Entertainment…
After a slight delay to the start of the working day, we proceeded with the preparation task for the collection of rafters over the front extension of the roof. We…
For the start of the new week, we start dealing with the 33 degrees angled roof sections, namely the “B”, “D” plus the “J” and “L” sections that makes up…
In quite strong winds, we concluded the job of hoisting and installing the remaining rafters to complete the “E” section of the roof. Well, actually, there is an additional bit…
With the wet weather suddenly dropping on our heads, we went back to the task of analysing and quantifying what we will need to put up a facia board right…
We started this morning on the “E” section of the roof and proceeded to install five rafters from E5 to E1 going up the diagonal beam over the Entertainment Room.…
We tackled the task of completing the “I” section of the roof by installing the eleven rafters we made these last few days. It was a bit of a juggle…