“E” Section half Done Before Rain Stops Play!
We started this morning on the “E” section of the roof and proceeded to install five rafters from E5 to E1 going up the diagonal beam over the Entertainment Room.…
A DIY Selfbuild by Stephen, Shaun & Daphne
We started this morning on the “E” section of the roof and proceeded to install five rafters from E5 to E1 going up the diagonal beam over the Entertainment Room.…
We tackled the task of completing the “I” section of the roof by installing the eleven rafters we made these last few days. It was a bit of a juggle…
This morning, we finished off the task of slicing the bevel ends on all the rafters that are filling in the final gaps in both ‘I’ and ‘E’ sections of…
This morning, we finished off the preparation work for the rafters to fill in the “E” section of roof, by slicing the 32 degree ends off all the plywood webbing…
Today, this morning, we finished off creating the last five rafters that makes up the “I” section of the roof, to add to the six we made yesterday. we also…
We finished off preparing the parts to make up the rafters to complete the “I” section of the roof this morning. This included cutting the Bird’s mouth into four of…
We cut the bevel end on the remaining rafter left-over from yesterday, namely M17. We are still trying to work out why our Bevel Slicing Machine is trying to pull…
Today we approached the task of slicing the bevelled ends on our nine rafters that are filling in the two triangular gaps in the “M” section of the roof. This…
Today, we finished off preparing all the parts to build the nine rafters that will fill in the two ends of the “M” section of the roof. The CLS timber…
This afternoon, we started the task of preparing all the bits and pieces that makes up the nine rafters (five from M1 to M5 and four from M14 to M17)…