On Friday, saw the arrival of the huge load of “Seconds” PU foam boards, all the way from South Wales where an outfit takes spoiled foam boards from the nearby factory and processes then and resells them to anyone who wants them. We wanted it all including the bad parts! By buying everything it makes it slightly more expensive than glass wool, nearly twice as expensive but it is so much easier and nicer to handle than the dreaded glass wool! Plus also, for our walls, the rigid boards are much more reliable and holds its shape vertically in the walls, compared with glass wool, especially the deep amount we are aiming for, over 300mm thick and we didn’t want the wool material collapsing under its own weight after a decade or so. So we found this outfit that packets this spoiled PU foam boards. This time, we wanted as much as he had and could fit on the lorry. We got forty pallets, each measuring roughly four feet by 4 feet and 4 feet high. There were 28 pallets loaded into the main part of the lorry, plus an additional 12 pallets loaded on a second trailer linked to the main truck.
Insulation-delivery-truck-and-trailer
It was slightly more complicated because the driver didn’t want to drive down our Loke and also didn’t want to abandon his trailer module in a layby up the road (was afraid that it would be blocked in). So we took our mini-digger with our new Fork Lift Attachment for our Mini-Digger up the Loke to the main Beccles Road and unloaded all the pallets up there and transported them down on our large flatbed trolley. We had the fabulous assistance from all our neighbours, helping to load two pallets on the trolley and getting that down to our property. That was twenty separate trips in all! Phew!
We landed the pallets all over the place in a random manner, just to get them out of the way and clear the Loke as quick as possible. It took us over two hours to unload the lorry and a further hour to finish transporting the rest! Double Phew!
Blocking-the-loke-with-Insulation-1
Blocking-the-loke-with-Insulation-2
This load of insulation boards will be sliced up and fitted into and between the legs of our wooden walls, filling it up to a depth of around 200 to 240mm deep, and then the rest will be filled up with glass wool. About three quarters of this load of foam boards will be used up in filling the walls, the rest will be used to start the job of filling the roof rafters and we do need another lorry load of seconds again to get that particular job done too!!
Big-Piles-of-Insulation-1
Big-Piles-of-Insulation-2
Big-Piles-of-Insulation-3
