Video Footage of the Entire Job of Covering Our Roof With Plywood Boards!
Here is a video of our roof being covered up with 12mm thick plywood sheets, starting on the “A” roof section and going around anti-clockwise and finishing on the “P”,…
A DIY Selfbuild by Stephen, Shaun & Daphne
Here is a video of our roof being covered up with 12mm thick plywood sheets, starting on the “A” roof section and going around anti-clockwise and finishing on the “P”,…
At last, we managed to get back out to work on our roof after all the twirling rain showers we had over the last four days – we had nearly…
We had a slow start today as we had a series of short sharp thunderstorms and showers with a twirling strong breeze so didn’t get going until about 11am. We…
Another day spent on the job of covering the roof with plywood boards, but we are making good progress. We have completed half the “P” section of the roof (in…
We moved on to doing the next roof section, the “O” steep roof but it was quite small and only needed three boards to complete it. Then it was time…
Under a slightly hazy sky, a lot more wind, temperatures hovering around 28°C hence the blazing Sun wasn’t so harsh, we continued to work on the three roof sections which…
What a blistering hot day! Our Thermometer recorded 28°C today! Under that heat, we continued putting up plywood boards and we got the ‘L’ section completed, almost all of the…
For another shortened day of work, we started on the “L” and “M” sections of the roof and got the second row fitted. It is very very hot out there…
For our half day of work today, we started on the next section of roof, this time it was “K”, and we got it all done! It only needed two…
Yesterday and today, we are progressing on covering the roof sections along the back of the building. We finished the first row, using our posh plywood boards (section “M”, “N”…