Paint 6!
The final touch up on the metal uprights is done! At last! It is looking as if the rust problem is solved! Hurray!
Electrics for the Lighting
The lighting wiring has been started today for the ten fluorescent T5 tubes, controlled by five electronic dimmable ballast. There will be a momentary switch control to operate the dimming…
Paint 4!
Today we paid attention to the problem we are having with some of the metal shelving uprights. We rubbed them all down to get down to bare metal in some…
Sliced 2 by 4 timber
We had the table saw outside today so we took the opportunity to slice the 2 by 4 inch timber diagonally down the length, to produce a sloping edge shaped…
Paint 3!
We have put on the third coat of paint on just the walls! It is looking good now but we have realised a problem with the metal upright brackets, the…
Paint 2!
Second coat of paint is on! We used the Dulux Brilliant White Silk at first but discovered that the pot was lumpy and would not stir smooth. It had small…
Paint!
The first coat of the white emulsion is on! We have bought two different brands of emulsion to find out which works better in the long run. Half the ceiling…
All Cleaned Up!
The final filling and rubbing all the surfaces including the ceiling is done! Yesterday we routed the bull nose shape on the light channel’s flange to make it blur and…
Energy Storage Modules!
We had the delivery of our plastic crates today. It was a long day of sorting it out and storing them away. It was funny as well because while we…