Air Ducting Under floor
We have finished investigating the problem with our under-floor ducting and why it was not blowing through with sufficient volume of air. It seems to be clear in the channel…
Air Heater coil
The final part of the air con unit was built today and connected to the ducting running under the floor. The heater water coils was mounted inside a mixing chamber…
Chimney Erected!
The chimney has been erected at the beginning of the Earth Tubes to allow fresh air into the garage and the temporary living quarters! The square chimney made out of…
Repair of Gutter soak-away
The temporary storage shed building and its gutter have been showing signs of being blocked. So we had a look at the down pipe to the soak-away module and cleared…
Air Con Unit motorised and sealed
Stephen finished off his assembly of the air con unit by fitting servo motors and connecting rods to the air vent shutters. He also sealed the cover on the front…
Underground Electric conduit replacement
To meet our electricity distributor’s requirements regarding the underground conduits, we had to replace our original 50mm twin wall conduit with their 40mm solid wall tube. It was a pain…
Air Con Unit & 2nd fan
The air con unit is now assembled together and the “old” extracted air is now going through the heat exchanger and blowing up the chimney to the outside as waste.…
Air Ducting
Over the last few days, we have installed the air ducting from the fan box, along the ceiling in the garden room, through the doorway into the lounge and then…
Heat Exchanger built and First Fan installed
We have finished the heat exchanger at last! It took three days to build, putting layers upon layers of thin plastic film and spacers to create 50 layers of air…
Heat Exchanger module started
Today we started building the heat exchanger module to transfer the energy in the old “waste” hot air to the clean cool fresh air! The new fresh air is coming…