Front Door Gable Wall Completed and First C rafter Created
This morning in lovely hot sunshine and no winds, we concluded the job of covering up the gable end of the Front Door extension that will have the porch coming…
A DIY Selfbuild by Stephen, Shaun & Daphne
This morning in lovely hot sunshine and no winds, we concluded the job of covering up the gable end of the Front Door extension that will have the porch coming…
Today, we first continued in the workshop to glue the other set of wide beam rafters, this time for the side door porch where we have a 89mm and a…
Today, after doing some analysis, calculations and measuring outside in very, very chilly winds, we started the task of joining together two lengths of CLS timber. We fetched in six…
In a chilly windy climate (prelude before the icy weather arrives), we hoisted up the long 7.6 metre horizontal Beam and connected it to the two arms coming out of…
This morning, we buried three sets of concrete blocks to support three legs which will soon be in place to brace the Front Porch. We didn’t put up the new…
After lunch, we thought it would be a good idea to make another template jig to help with the task of slicing off the tops off the cement boards of…
After we had finished the rafters, we got on with making the long beam that will form the porch for the Front Extension, overhanging the front door and Entertainment window.…
Today, in some lovely sunshine but with a chilly wind, we concluded the installation of the five “N” rafters and twelve “K” rafters! This, finally, at last, sees the end…
The man with the smelly lorry came this morning to do our regular emptying of our Septic Processing Tank. It is almost a year since the last one. We then…
This morning, we did the final stage of preparing the completed rafters before they will go out and installed up into the Roof. The “K” section, twelve rafters (ten full…