First Set of Oak Timber Joined
This afternoon, after lunch, we finished off planing the various pieces of the Oak Timber so they are ready for the job of gluing them together to form wide enough…
Oak Timber Still Continues to be Processed
These last few days have been somewhat disrupted with various external meetings and other commitments and the work on sorting out, planing and processing the Oak Timber have been patchy.…
Oak Timber Sorted and Being Processed
Today, the all the timber pieces were sorted, measured and recorded in a new spreadsheet. We now have a realistic list of timber pieces with known minimum widths and we…
New Timber Storage Created and Tidied Up Old Pile of Timber
Today, we finished off creating the new Covered Storage Area while it was raining gentle showers all day. A chest high line of “arms”, six of them, are now mounted…
Odd Jobs and New Timber Protected Storage Area
Today, in the morning, we did some odd jobs that were left over from the weekend, tidied up the workshop, repaired a puncture in one of our tyres for our…
Oak Timber Work Continues
This afternoon, the task of passing our Oak Timber through our Planer Machine to produce one straight flat edge continues. The remaining pieces (about 20 lengths) were completed. Then the…
A Spring Clean inside Building
This afternoon, we decided that it was finally time to do a good sweep of the concrete surface inside our building. There is quite a lot of saw dust, wood…
Sun Shield Over Corridor Created and Mounted
Yesterday and today, we did the job of covering our long skylight running down the whole width and length of our Corridor in our temporary living quarters. Each year, we…
Planer Machine Serviced and Repaired
Yesterday and today, the planer machine was serviced, and some repairs were performed. We had been having trouble with the power supply while using the machine and occasionally, we would…
Final Five Inside Corners Trimmed!
The last task of the day was to adapt our template that we have been using to trim the top of our cement boards on our walls so we can…