Spring Clean, Utility Rail and Garden Room
The last week has been a long process of moving and sorting all the bits and pieces stored in the old workshop and moving it all into the garage. We…
A DIY Selfbuild by Stephen, Shaun & Daphne
The last week has been a long process of moving and sorting all the bits and pieces stored in the old workshop and moving it all into the garage. We…
We sliced up a sheet of 18mm Plywood we had in our stack of sheet wood, it is rather dirty and got loads of screws holes but we thought we…
we spend the day ripping out the old shelves and the flimsy wall coverings. We got a fire going in our incinerator to get rid of the hardboard and other…
Today we made a set of shelves 8feet by 4feet to hold all the left over sheet materials. It consist of 7 separate shelves starting 600mm off the floor and…
Today we sliced up 10 sheets of 18mm OSB boards into a whole collection of shelves! We planned to have 600mm deep shelves for our boxes on the right side…
we did some more illumination tests and discovered that the reading is now 325lux, a drop of about 5lux after we have painted the ceiling with the Absolute White. We…
We put in the 100mm wide strips into the back of the Utility Rail to cover up the glass wool. We will use shoulder dresser hooks or in other words…
The final coat for the ceiling was put on this morning! The special flavour paint came yesterday and we collected it from Jewson, called Dulux Absolute White! It is stated…
All ten tubes are up and installed right around the Light Channel in the large front room of the Garage. Each T5 tube produces about 5000 lumens as stated on…
The electric cables (mains and control lines) are in place inside the Light Channel. Four of the 10 tubes are installed. A light switch is wired in beside the internal…