Skylight Double Glazing Units – Part 1
We started the new week by tackling the task of installing our new double glazed units up in our Skylight. We have twenty-two units to put up, 8 triangles and…
A DIY Selfbuild by Stephen, Shaun & Daphne
We started the new week by tackling the task of installing our new double glazed units up in our Skylight. We have twenty-two units to put up, 8 triangles and…
The first use of our new High Platform, that we built earlier in the day, was to go along up in the Skylight and slice off the small metal posts…
Today, after we have sliced up all the remaining foam boards yesterday, we proceeded to demission the slicing table, taking off the sabre saw that had been mounted underneath the…
We spent the day doing a whole heap of slicing up the last remaining heap of foam boards and chunks, chopping them down so that they are all a maximum…
Over the last couple of days, we installed water pipes inside the roof of the Great Room, drilling 15mm holes through each rafters, located about a metre up the slope…
We have been researching into what we would need to incorporate a fire suppression system, using spray nozzles to produce a fine mist of water droplets. We have found that…
We spent three days levelling up all the “ceilings” of the Great Room. We wanted to make sure that the overall surface of each plane of the sloping roof is…
This week, we have been installing a set of conduits for routing electric lighting cables to various hidden locations all over the ceiling in the Great Room. We wanted to…
The final load of our third hand rubbish pieces of hard PU foam boards have been processed and most of it is now stuffed and glued into the roof rafters…
We decided to add a ‘feature’ to the Great Room by exposing the rafters where they run in front of the Conservatory Extension Gable wall. We are going to continue…