Roselea

We resumed the task of getting our Oak Window Frames prepared, ready to be inserted into the house. The next job was to waterproof the inner section of the frames…

For the start of the new week, we sanded down all the wood filler we had applied to the Sill and Header pieces where there were small knot holes and…

We started our new week in the workshop to continue developing the scorching machine. We decided to completely dismantle our first version and start over again. Using our new found…

The man with the tank, the same lorry and man as last year, came this morning. We attached a piece of 68mm diameter plastic drain pipe on to the massive…

Monday was the day we finished off gluing the octagon “wings” together and we now have a pile of 24 wings (and one spare just in case). They are not…

We resumed the task of putting up the cladding support battens in, around and under the two Porches, i.e. the Side Door and the Front Door sections. We had to…

We got on with the work we left standing on Saturday, which is putting up the cladding battens onto the walls, ready for installing the Larch cladding. We proceeded by…

After skipping Monday for other commitments, we got on with making doors and ramps for our three entrance ways in our main house. We finished off the Front Door, putting…

At the start of the week, we needed to make sure that we had all the required cladding support battens in place, especially around the drainpipes. The cladding needs something…

This week, we created a machine to slice up our pile of random insulation sheets (which can be up to 150 mm thick) and started putting them into the walls…