A DIY Selfbuild by Stephen, Shaun & Daphne
For this task, we ordered another batch of polyester resin from our suppliers, this time, specially formulated to be much thicker and jelly like so that we could paint it…
We have identified that we need to construct the first part of the air ducting inside our Utility Cupboard that connects the “fresh” air coming through ducting buried underground. We…
Yesterday, we fitted our newly arrived tank connector and let the LSX sealant set overnight. today, we stood the tank upright and placed it on two small pieces of battens…
While we waited for the leak test on our new cold water tank, we got on with the task of installing a 32mm water pipe, all the way from the…
While we waited for our Test Tank to dry out completely before we can initiate any repairs, we got on with building the mould for our next tank to make,…
We are at the stage of designing and building our water tanks, one cold and one hot. Because, we have a limited target volume to locate these tanks, we decided…
We were having an upgrade of our phone and internet connections but the old conduit that we had running from the telegraph pole out on the Loke, going all the…
Today, Tuesday, we had our local professional electrician come around to upgrade our main Electricity Supply Board, first to install a fused cut-off switch immediately after the meter. The original…
Stephen wanted a solo project whilst Shaun in resting, so he started on the Tech cupboard. First the two walls next to the bathroom and Storage cupboard where boarded with…
Today, we tackled the task of digging and loosening all the various pipes and conduits that run from the Garage to the House, and get them all laid out to come up…