Number Three Module All Done!
The “Number 3” Energy Module has been completely buried and all finished. The three set of conduit pipes were inserted and connected all together in a central point, so that…
Grease Loaded into All Joints!
This afternoon, Stephen performed some basic maintenance tasks on the mini-digger and loaded grease into all the joints and moving parts. The digger needs re-greasing fairly regularly, every 20 “clock”…
New Stop Knob Fitted!
Stephen replaced the old defunct Engine Stop knob on the dumper truck with a shiny new one! It was a relatively simple job and took about 30 minutes. It is…
Number 3 Module Half Buried and Got its Lid On!
this morning (only), we half buried the Number 3 Energy Module and put on the insulated lid. We sliced off all the edges and dumped the pieces in and around…
Number 3 Unit Assembled and Wrapped Up!
We have assembled the third set of our collection of Energy Modules today, the second biggest one! We put down two layers of insulation boards, a total of 240mm thickness…
48 Aquacell Crates Cleaned Up!
It was a long day of cleaning our Aquacell crates we need for Energy Module Number 3. Like before, each one had to be split apart and then each half…
Number 3 Hole is Dug and Dead Level on Bottom!
We finished digging out the third hole. We then inserted two parallel wooden side rails into the ground, set exactly at the required depth (minus 1.7 meters below ground level)…
Dumper Truck Wouldn’t Stop!
Our old dumper truck wouldn’t stop when the stop button was pulled – a real ironic case of a Stop button causing a Stoppage! The cable from the spring loaded…
Number 3 Module Is Under Way!
For the start of the week, we started on Number 3 Energy Module this afternoon (having had other commitments in the morning) by marking out the boundary of the hole…
Second Module All Finished!
Today, we finished off the 2nd Energy Module! We put on a lid of PU foam boards of a variety of thicknesses (90-120 mm) and we used the off cuts from…