Shelves
Today we sliced up 10 sheets of 18mm OSB boards into a whole collection of shelves! We planned to have 600mm deep shelves for our boxes on the right side…
A DIY Selfbuild by Stephen, Shaun & Daphne
Today we sliced up 10 sheets of 18mm OSB boards into a whole collection of shelves! We planned to have 600mm deep shelves for our boxes on the right side…
we did some more illumination tests and discovered that the reading is now 325lux, a drop of about 5lux after we have painted the ceiling with the Absolute White. We…
We put in the 100mm wide strips into the back of the Utility Rail to cover up the glass wool. We will use shoulder dresser hooks or in other words…
The final coat for the ceiling was put on this morning! The special flavour paint came yesterday and we collected it from Jewson, called Dulux Absolute White! It is stated…
All ten tubes are up and installed right around the Light Channel in the large front room of the Garage. Each T5 tube produces about 5000 lumens as stated on…
The electric cables (mains and control lines) are in place inside the Light Channel. Four of the 10 tubes are installed. A light switch is wired in beside the internal…
The final touch up on the metal uprights is done! At last! It is looking as if the rust problem is solved! Hurray!
The lighting wiring has been started today for the ten fluorescent T5 tubes, controlled by five electronic dimmable ballast. There will be a momentary switch control to operate the dimming…
Today we paid attention to the problem we are having with some of the metal shelving uprights. We rubbed them all down to get down to bare metal in some…
We had the table saw outside today so we took the opportunity to slice the 2 by 4 inch timber diagonally down the length, to produce a sloping edge shaped…