Stainless Steel Mesh!
42 square pieces of stainless steel mesh was cut and stapled over all the holes previously drilled a couple of days ago. The metal mesh will reduce the possibility of…
Interior Dividing Wall Framework is UP!
Our middle wall inside the Garage is assembled and is UP! This wall is ready for the iBeams (roof rafters) to be thrown up, sit on the supports and fixed…
Bolted Down & Holed Out!
Yesterday and today we bolted down the two side walls, there are over twenty thunderbolts in each wall! We pulled out a string to make sure the walls are straight…
Front Wall completed!
The front wall of the garage is now completed! All the 18mm OSB boards is up and trimmed around each of the door entrances. Also we have cut out the…
GluLam Beam is up!
The front of the garage is getting there! The central pillar is up and bolted down! Now the huge single piece timber called GluLam has been hoisted into place! It…
Cladding OSB Boards on left side is UP!
The structural OSB Boards are up! The left hand side of the garage was covered in seven and a half boards in just a couple of hours! It was much…
OSB Boards cladding is up for the right side!
Today was the day for mounting the OSB 11mm boards onto the framework! We started with the right hand side of the garage and we soon discovered that none of…
Right Side Framework is UP!
We had a good day today! Started 10am and finished 7pm! The right hand side of our Garage is UP! The framework is erected along with part of the front…
Finally At Last! Work resumes!
We have had loads of bad weather for the last week and outside work has been grounded! We had snow, hail, sleet and loads of rain! A very wet November!…
Back wall up!
Yahoo! the first wall of the building project is completed! We started the day by using the mini-digger to lift the wall to the just above horizontal, this reduces the…