Eleven Scaffolding Modules Created
These last two days have seen the creation of new wooden scaffolding modules, eleven of them in total, each measuring 8feet by 4feet and 2.1metres (7feet) high. We spend half…
Wooden Scaffolding Framework To Be Built Around Back of Building
This afternoon, we decided that we needed to build a fixed scaffolding framework around the back of the house as our mobile scaffold tower will not be able to navigate…
Analysed and Calculated Gutter Flow Direction and Angle of Slope
This morning, we sat down and did some analysis on the rain collection quantity for each of our roof sections, which totals (including the proposed Conservatory) to 360 square metres.…
Second Half of Fascia Boards All Glued and Double Screwed
Today under a very strong Sun, we continued our way around the house, taking down each section of the Fascia, gluing the ends of the rafters and the joints and…
“P” Section is Completed Together With their Two Downpipe Channels and Began Permanently Gluing All Fascia Boards
We finished off the “P” section of the Fascia boards where they connected to the temporary Downpipe Channels (which are alongside what will be the conservatory). After that bit was…
Last Three Fascia Sections Done and Three Downpipe Channels Installed
We carried on with the “N”, “O” and “P” sections of the Fascia boards, getting the last two outside corners up and fitted (on the NO and OP corners) and…
Six and Half Section of Fascia Boards Completed
Under some glorious sun, we continued with the mounting up of the Fascia Boards. We resumed on the “H” section, then around an outside corner which had it 45° bit…
Downpipe Channels Installed and Side Porch Fascia Mounted
Yesterday we tackled the job of installing one of our Downpipe Channels for the first time, now that we have up enough Fascia board. The “AB” corner was our designated…
Fascia Boards Progresses Around the House
Yesterday and today, we carried on processing the Fascia boards, sorting out the pile of Oak pieces, taking off the bad ends, adjusting lengths for outside corners, slicing bevel ends,…
Fascia Boards For 32degree Roof Sections Processed
Yesterday and today, we continued with the processing of the set of Fascia Boards that has the 32degree slope on them, and sorted them out to form sets for the…