Constructed Hot Water Heat Exchanger Coils Plus Other Pipes and Sensors
We have been spending a day here, a day there, whenever we were waiting for glue to set, paint to dry etc. etc. and got on with the task of…
A DIY Selfbuild by Stephen, Shaun & Daphne
Installation of Utilities (Header Tank, Hot Tank, Water pipes, Air ducting etc) and Automation
We have been spending a day here, a day there, whenever we were waiting for glue to set, paint to dry etc. etc. and got on with the task of…
We have been tackling our Utility Room, to sort out the pipes that have been “coiled” up in a untidy bunch for quite a while now, so that we can…
Today, we spent all day installing a whole load of a variety of conduits, all coming from the Tech Cupboard, but going off to many different destinations, to serve the…
We started putting in the Utility pipes and ducting underneath our downstairs toilet, which we are calling by its traditional name of a “Cloakroom”, which is a very odd name…
It is time to start making the mould for our Hot Water Tank this week. We took the material we used for the Cold Water tank and managed to reused…
One of the things we needed to do and finally got around to doing it this week, is to seal the tiny little leaks we had in our test tank…
When we had a spare moment or two, between doing other tasks, we explored the Cold Water System and looking at building it. We did an order for plumbing bits…
For this task, we ordered another batch of polyester resin from our suppliers, this time, specially formulated to be much thicker and jelly like so that we could paint it…
We have identified that we need to construct the first part of the air ducting inside our Utility Cupboard that connects the “fresh” air coming through ducting buried underground. We…
Yesterday, we fitted our newly arrived tank connector and let the LSX sealant set overnight. today, we stood the tank upright and placed it on two small pieces of battens…